Guide: Install Machine Washable Carpet Tiles

Introduction:
Say goodbye to the days of complicated carpet installations. With Luxury Carpet Tiles (LCT), you can easily rejuvenate any room in your home. Follow our step-by-step guide to become a Carpet DIY master in no time.

What You'll Need:

• Broom & dustpan
• Vacuum cleaner
• Tape measure
• T-square
• Marker
• Utility knife
• Safety gloves
• Frixion Pads (included)
• Carpet Tiles (included)

Step 1: Prepare Your Space
Before diving in, make sure your installation site is clean, level, and ready to go. The room temperature should be maintained between 55°F & 85°F with a relative humidity not falling below 40% or exceeding 70%. Inspect your LCTs before installation and contact the seller if any tile is damaged.

Step 2: Measure
Measure the center of your room by locating the two longest, straightest walls. Use the tape measure to find the center of each wall, mark the lines, and where they intersect will be the center of the room. This will be your starting point for laying out the tiles.

Step 3: Layout Your Space
Dry fit your tiles starting from the center of the room. No special tools are required—just your eyes and hands. Pay attention to the directional arrows on the back of the tiles to ensure a uniform installation pattern.

Step 4: Make the Cuts
Cutting your tiles accurately is crucial for a snug fit. Be sure to cut on a protected hard surface, and remember to vacuum after cutting to keep your workspace clean.

Installation Options:

• Using FriXion Pads (Recommended): These innovative pads lock the tiles in place without any glue. These come with your purchase and adhere to your subfloor, with a velcro top you can add and remove the tiles to with ease.
• Double-Sided Tape: An alternative for a semi-permanent fix.
• Spray Adhesive or Full Spread Adhesive: For a permanent installation.

Step 5: Enjoy Your New Space
Once the tiles are laid out and fixed in place, step back and admire your work. You've just installed a beautiful, plush carpet without professional help. Congratulations!

Closing Thoughts:
Installing LCTs is a breeze with the right tools and a bit of patience. Not only do you save on installation costs, but you also get the satisfaction of a job well done. So, what are you waiting for? Roll up your sleeves and start your DIY carpet project today!

This blog post is structured to provide clear instructions and encourage readers to engage in DIY carpet installation. It can be enhanced with images or videos showing each step for a more comprehensive guide.